Metalprocorp 40 Ton Hydraulic Ironworker w/Foot Switch - MP4000FS

If you are looking for an entry level iron-worker with 40 tons of professional capabilities look to the MetalPro MP4000FS. This machine was designed for efficiency on a budget. Do not fumble around with hand levers or changing blades and jigs to cut with. The MP4000FS comes equipped with our 6” 3-in-1 cutting shear, foot-switch control, and punching station which is all run on 110volts! This machine can also handle our line of accessories to help with any project.  If you need to get started punching, shearing, and bending on a budget, let MetalPro or one of our dealers help you today.

40 TONS OF POWER
The machine is ready with a die holder, stripper, and punch retaining nut. The punch station can be used with a range of notchers, custom shape punching, and forming operations. The punch ram and retaining nut are machined and heat treated for long life. The shear handles flat bar, round, square, and angles in one quick set up. All wear parts and blades made from heat treated, high grade tool steel. The large 11 x 16" power cavity delivers 20 tons at the shear. The outboard punching station delivers 40 tons at the punch and is designed to work with a variety of MetalPro accessories.

Benefits

• Lower cost alternative to higher priced equipment

• More fabricating capabilities per dollar spent on equipment

• Just as fast and accurate as expensive machines

• Works in any shop – plugs into standard 110V 20 amp outlet

• One year parts/labor warranty

Standard Features

• Punch capacity of 40 tons

• 3 3⁄4" throat depth

• 2" die holder, punch retaining nut and stripper

• Power cavity with 3-in-1 shear

• Guarding complies with ANSI B11-8 standards

• Meets American National Safety Standards for ironworkers

• Optional brakes and custom tooling sold separately

Specifications – Rated on 65,000 PSI Tensile

Frame Dimensions

• Width: 24"
• Height: 58"
• Length: 301⁄2"
• Weight: 435 pounds

Speed

• Strokes per minute: approximately 6-8
• Motor: 110V 1 1⁄2 horsepower
• Capacity: 40 tons
• Throat Depth: 33⁄4"
• Punch: 40 ton max capacity

Shear

• Flat bar: 3/8"x 4" and 1⁄4"x 6"
• Angle: 1⁄4"x 3"x 3"
• Rod: 3⁄4"
• Square: 5/8"
• Hydraulics: 2900 PSI
• Oil capacity: 1.5 US gallons

Optional Accessories (sold separately)

• Brake: 20 tons
• Notcher: optional 1⁄2, 3⁄4, 1,11⁄4, 11⁄2, 2 inch sch. 40
• Picket tool: optional 1⁄2, 5/8, 3⁄4 inch
• Pressing: custom tooling available
• Round, square, oblong, and custom shaped punches and dies
• Wheel kit