Introducing Our Electronic Ignition Kits Enhance your fire pit experience with our 14″ Hot Surface Electronic Ignition System. Start Up:  This is done by use of a wall switch or remote control. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.  Operation:  While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence. Shut Down:   To turn OFF the fire pit simply use wall switch, remote control or whole house system. Features: Fully Assembled- ready to install. Control components are protected within valve box. Start via wall switch, remote or whole house system; auto re-light if flame is lost. Ignition is complete using a robust and reliable Hot Surface igniter. On/Off models: Use with optional wall swit