Aluminum Tank Industries wedge transfer tanks are designed for flat bed trucks or pickups with a 5th wheel. The wedge design offers a sloped view for easy viewing and 5th wheel clearance.  Note : ATI Transfer Tanks require a fuel pump to dispense fuel. We offer GPI fuel pumps as an optional add on product. The ATI wedge tank is a DOT approved Transfer Tank for gasoline, kerosene, methanol, diesel, and aviation fuel.  Note : Standard aluminum transfer tanks are only designed to hold fuel pumps up to 15 gpm or 30 pounds of weight.  Heavier fuel pumps require a heavy duty aluminum tank. Call or contact us if you need a heavy duty tank.   ATI Wedge Transfer Tank Dimensions : 60 gallon – 56 inches long by 20 inches wide by 18 inches high. *Mounting tabs add 1.5 inches to the side and front of the tank. The fill neck adds 2.5 inches of height to the tank. All ATI refueling tanks come standard with the following: Special Permit issued by the US Department of Transportation. Legal for gas, diesel, methanol, kerosene, aviation fuel, and other liquids. Commercial grade lockable vent / prevent filler cap. Fully baffled to reduce movement of contents. Two 2 inch NPT reinforced bungs for superior strength. A 3/8″npt drain plug, Hold down brackets. Pressure and leak detection test. Clean and free of debris inside and outside of the tank. 1 year limited warranty. a vent/prevent cap, Fully welded baffles to reduce slosh and add strength. Designed for use with transfer pumps up to 30 pounds. *Severe series tanks required for pumps over 30 pounds. These tanks are constructed from rugged diamond plate aluminum and are all available with a black or white powder coated finish. Aluminum Tank Industries has been granted a special permit from the U.S. Department of Transportation for the legal manufacture, mark and selling of legal aluminum refueling transfer tanks. These tanks can be used for commercial and state applications. Check other ATI Transfer Tanks or all Wedge Transfer Tank options.