Product Overview

The EC-2 and EC-3 are constructed of all-welded type 304 #4 finished stainless steel. The doors have a removable inner liner of aluminum plate with full perimeter gasket seal, an outer shell of one piece welded stainless steel, and a wheel-and-screw closing mechanism. The doors, with a clear opening of 10-1/4� x 26-3/8� (260 mm x 670 mm) shall latch upon closing and open 180 degrees upon latch release. Compartment operation shall be at a maximum pressure of 6 psi (41 kPa). Each compartment shall be provided with universal pan supports. Each optional sliding shelf will support two full size (1/1 gastronorm) pans.

The control housing is constructed of #4 finish stainless steel with a full-access removable panel. Each compartment can be independently controlled by an automatic timer control with visible and audible signals. At the end of the cooking cycle, the controls automatically shut off and exhaust the incoming steam, drain the condensate from the compartment, and sounds a continuous audible signal until turned off manually.

The compartment cooker is mounted on a cabinet base with full perimeter angle frame, reinforced counter and boiler mountings, electric boiler with controls which shall include the following as standard, automatic water level control, pressure gauge, water gauge glass, pressure control with secondary safety pressure control, air vent, and safety relief valve. Thermostatically controlled cold water shall automatically condensate exhausted steam into water before releasing it to the drain. The cabinet shall be all stainless steel #4 finish type 304, hinged doors and 6� (152mm) stainless steel legs fitted with 4 adjustable flanged feet for mounting to the floor. A water treatment system, automatic blow down, CSD-1 boiler controls, and split water line comes standard.

Features

• Manual controls
• Automatic timers
• Split water lines
• Universal pan guides
• CSD-1 boiler controls
• Direct Steam c/w PRV pressure reducing valve
• �Y� strainer
• 36� Cabinet Base

Options

• 36 KW
• 42 KW
• 380 VAC, 3 Phase, 50/60 Hz
• 415 VAC, 3 Phase, 50/60 Hz
• 480 VAC, 3 Phase, 50/60 Hz
• 415/240 VAC, 3 Phase, 4 wire
• 380/220 VAC, 3 Phase, 4 wire
• 575 or 600 VAC, 3 Phase, 60 Hz (EBVS-3)
• Stainless steel rear panel (SSB-)
• Steam take-off kit
• Spray and rinse assembly
• Sheet pan support (SPS-PC1 or SPS-PC2)
• Wire shelf rack (SSR-PC)

Downloads