FAST + FREE Shipping & Returns on all orders above $999

Exair Model 1009 1/8 MNPT Adjustable Air Nozzle

EXAIR’s Safety Air Nozzles eject a small amount of compressed air 360° around the outer ring that combines with the air ejected from the center hole to produce a high volume, high velocity blast of air. The slotted end allows air to vent safely and prevents blocking the outlet. EXAIR offers the Safety Air Nozzle in most popular pipe sizes for easy retrofit to existing blowoffs. Available in brass and Type 303 Stainless Steel.

Applications

Part cleaning
Chip removal
Liquid blowoff
Part cooling
Material conveying
Part ejection
Fiber conveying
Air assist

Advantages

Reduced compressed air cost
10 dBA average noise reduction
High velocity airstream
Compact
Installs with a socket wrench
Meets OSHA noise level requirements
Meets OSHA pressure requirements
Models available in brass and stainless steel

Materials

Type 303 Stainless Steel – This is the most common grade of stainless steel. It offers good strength and is best suited to mildly corrosive environments. It can withstand temperatures up to 800°F (427°C).

Brass – general purpose applications. Max temp. 400°F (204°C).

Accessories

Swivel Fittings – make it easy to adjust the aim of the Air Nozzles and Jets. Correct placement of the blowing angle can help optimize performance, reduce noise levels and improve efficiency. Swivel Fittings permit a movement of 25 degrees from the center axis for a total movement of 50 degrees. Type 303 or 316 Stainless Steel.

Magnetic Bases – are suited to applications where frequent movement of the Air Nozzle or Jet is required. The powerful magnet permits horizontal or vertical mounting that will hold the blowing position of the Stay Set Hose. A shutoff valve is provided that can be used to vary the force and flow.

Adjustable Air Nozzle Performance
Air Consumption		Force*		Sound Level
SCFM	SLPM	Ozs	Grams	dBA
13	368	12	340	79
*Force measured at 12″ (305mm) from target with a .008″ (0.20mm) factory setting. Sound level measured at 3′ (914mm) All measurements taken at 80 PSIG (5.5 BAR)

How EXAIR Air Nozzles Work

Air Nozzles use the Coanda effect to amplify compressed airflow up to 25 times or more. Compressed air is ejected through a series of nozzles on the outer perimeter. As the air travels along the outer wall of the nozzle, surrounding air (blue arrows) is entrained into the stream. The airstream that results is a high volume, high velocity blast of air at minimal consumption. The air is always ejected so it can vent safely, well below OSHA dead end pressure requirements, should the nozzle end be blocked.

Dimensions

Adjustable Air Nozzle Dimensions & Airflow Pattern

Adjustable Air Nozzle Standards and Certifications

EXAIR Adjustable Air Nozzles comply with OSHA’s Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.