Exair Model 1101SS 1/4 MNPT St. St. Super Air Nozzle

EXAIR’s Safety Air Nozzles eject a small amount of compressed air 360° around the outer ring that combines with the air ejected from the center hole to produce a high volume, high velocity blast of air. The slotted end allows air to vent safely and prevents blocking the outlet. EXAIR offers the Safety Air Nozzle in most popular pipe sizes for easy retrofit to existing blowoffs. Available in brass and Type 303 Stainless Steel.

Applications

Part cleaning
Chip removal
Liquid blowoff
Part cooling
Material conveying
Part ejection
Fiber conveying
Air assist

Advantages

Reduced compressed air cost
10 dBA average noise reduction
High velocity airstream
Compact
Installs with a socket wrench
Meets OSHA noise level requirements
Meets OSHA pressure requirements
Models available in brass and stainless steel

Materials

Type 303 Stainless Steel – This is the most common grade of stainless steel. It offers good strength and is best suited to mildly corrosive environments. It can withstand temperatures up to 800°F (427°C).

Brass – general purpose applications. Max temp. 400°F (204°C).

Accessories

Swivel Fittings – make it easy to adjust the aim of the Air Nozzles and Jets. Correct placement of the blowing angle can help optimize performance, reduce noise levels and improve efficiency. Swivel Fittings permit a movement of 25 degrees from the center axis for a total movement of 50 degrees. Type 303 or 316 Stainless Steel.

Magnetic Bases – are suited to applications where frequent movement of the Air Nozzle or Jet is required. The powerful magnet permits horizontal or vertical mounting that will hold the blowing position of the Stay Set Hose. A shutoff valve is provided that can be used to vary the force and flow.

Adjustable Air Nozzle Performance
Air Consumption		Force*		Sound Level
SCFM	SLPM	Ozs	Grams	dBA
13	368	12	340	79
*Force measured at 12″ (305mm) from target with a .008″ (0.20mm) factory setting. Sound level measured at 3′ (914mm) All measurements taken at 80 PSIG (5.5 BAR)

Super Air Nozzle Performance
Air Consumption		Force*		Sound Level
SCFM	SLPM	Ozs	Grams	dBA
14	396	13	369	74
*Force measured at 12″ (305mm) from target Sound level measured at 3′ (914mm) All measurements taken at 80 PSIG (5.5 BAR)

Dimensions

Adjustable Air Nozzle Dimensions & Airflow Pattern

Adjustable Air Nozzle Standards and Certifications

EXAIR Adjustable Air Nozzles comply with OSHA’s Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

Efficiency Lab

Does your company currently use a blowoff product similar to EXAIR’s that you’d like us to evaluate? Ship it to the EXAIR Efficiency Lab! Our qualified staff will test it for FREE, using EXAIR’s calibrated testing equipment. We’ll compare the performance of your existing product (air consumption, effectiveness, noise levels, efficiencies, etc) with the EXAIR Intelligent Compressed Air® products. The results will be published in a comprehensive report that includes a cost savings analysis. For most applications, EXAIR products can help you improve your efficiency AND typically pay for themselves in a matter of weeks.

To participate in our Efficiency Lab testing, please complete this Product Efficiency Survey