Exair Model 1109SS Pico Super Air Nozzle, M5x0.5

EXAIR’s Pico Super Air Nozzle delivers a precise blowoff with a highly focused, forceful blast of airflow. The narrowly focused air pattern measures 1.3″ in diameter at 6″ away from the surface. The noise level is only 68 dBA. Thread size is M5x0.5 and it is available in 316 stainless steel or PEEK thermoplastic

Applications

Part cleaning
Chip removal
Liquid blowoff
Part cooling
Material conveying
Part ejection
Fiber conveying
Air assist

Advantages

Reduced compressed air cost
10 dBA average noise reduction
High velocity airstream
Compact
Installs with a socket wrench
Meets OSHA noise level requirements
Meets OSHA pressure requirements
Models available in brass and stainless steel

Materials

Type 303 Stainless Steel – This is the most common grade of stainless steel. It offers good strength and is best suited to mildly corrosive environments. It can withstand temperatures up to 800°F (427°C).

Brass – general purpose applications. Max temp. 400°F (204°C).

Accessories

Swivel Fittings – make it easy to adjust the aim of the Air Nozzles and Jets. Correct placement of the blowing angle can help optimize performance, reduce noise levels and improve efficiency. Swivel Fittings permit a movement of 25 degrees from the center axis for a total movement of 50 degrees. Type 303 or 316 Stainless Steel.

Magnetic Bases – are suited to applications where frequent movement of the Air Nozzle or Jet is required. The powerful magnet permits horizontal or vertical mounting that will hold the blowing position of the Stay Set Hose. A shutoff valve is provided that can be used to vary the force and flow.

Specifications

Pico Super Air Nozzle Performance
Air Consumption		Force		Sound Level
SCFM	SLPM	Ozs	Grams	dBA
4.9	139	5.0	142	68

How EXAIR Air Nozzles Work

Air Nozzles use the Coanda effect to amplify compressed airflow up to 25 times or more. Compressed air is ejected through a series of nozzles on the outer perimeter. As the air travels along the outer wall of the nozzle, surrounding air (blue arrows) is entrained into the stream. The airstream that results is a high volume, high velocity blast of air at minimal consumption. The air is always ejected so it can vent safely, well below OSHA dead end pressure requirements, should the nozzle end be blocked.

Dimensions

Super Air Nozzle Standards and Certifications

EXAIR Super Air Nozzles comply with OSHA’s Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

Efficiency Lab

Does your company currently use a blowoff product similar to EXAIR’s that you’d like us to evaluate? Ship it to the EXAIR Efficiency Lab! Our qualified staff will test it for FREE, using EXAIR’s calibrated testing equipment. We’ll compare the performance of your existing product (air consumption, effectiveness, noise levels, efficiencies, etc) with the EXAIR Intelligent Compressed Air® products. The results will be published in a comprehensive report that includes a cost savings analysis. For most applications, EXAIR products can help you improve your efficiency AND typically pay for themselves in a matter of weeks.

To participate in our Efficiency Lab testing, please complete this