Exair Model 6292 Vac-u-Gun Transfer System
Description
EXAIR’s Model 6292 Vac-u-Gun Transfer System is a portable, lightweight, easy-to-use transfer tool that can also be used as a blow gun or vacuum gun. A low cost solution to a wide variety of industrial housekeeping problems. The Vac-u-Gun has durable die cast construction with no moving parts to wear out.
Applications
- Vacuum shavings
- Vacuum absorbent
- Vacuum sawdust
- Vacuum spills
- Transfer small parts
- Transfer pellets
- Transfer trim
- Blow chips
- Blow water
- Blow coolant
- Blow scrap
Advantages
- Low cost
- No moving parts – maintenance free
- Durable – die cast construction
- Switch from vacuum to blow mode in seconds
- Safe – no electricity
- Meets OSHA pressure requirements
- Vacuum or blowoff
- Lightweight and portable
- Versatile
Vac-u-Gun Styles
Model 6192 Collection System is designed to make your Vac-u-Gun a lightweight, easy-to-use vacuum tool. It includes the Vac-u-Gun, reusable bag, brush, crevice tool, skimmer tool and two extension wands.
Model 6292 Transfer System is designed to turn your Vac-u-Gun into a handy, lightweight transfer tool. It includes the Vac-u-Gun, 10′ (3m) of vacuum hose at 1-1/2″ (38mm) I.D., brush, crevice tool, skimmer tool and two extension wands.
Model 6392 All Purpose System makes it easy to use your Vac-u-Gun as a lightweight vacuum or handy transfer tool. It includes the Vac-u-Gun, a reusable bag, 10′ (3m) of vacuum hose at 1-1/2″ (38mm) I.D., brush, crevice tool, skimmer tool and two extension wands.
What’s Included
- Vac-u-Gun
- 10′ (3m) flexible vacuum hose at 1-1/2″ (38mm) I.D.
- Brush
- Crevice tool
- Skimmer tool
- Two extension wands
Specifications
Performance
Vac-u-Gun Performance |
|||||||||
| Pressure Supply | Air Consumption | Vacuum | Force | Inlet | Sound Level | ||||
| PSIG | BAR | SCFM | SLPM | “H2O | kPa | Ozs | Grams | NPT | dBA |
| 80 | 5.5 | 13 | 368 | -29.5 | -7 | 9 | 255 | 1/4 | 84* |
| *tested in “vacuum” mode with bag attached | |||||||||
How It Works
How the Vac-u-Gun Works |
|
 |
|
|
Compressed air, normally 80-100 PSlG (5.5 – 6.9 BAR), flows through the inlet into an annular plenum chamber. Airflow is injected into the throat of the gun through directed nozzles. These jets of air create a vacuum at the intake which draws material in and accelerates it through the unit. The chips, debris or other particulates can then be exhausted into a filter bag or hose attached to the Vac-u-Gun System. |
|
Reviews
There are no reviews yet.