Flashforge Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer

Great printer. Took me a little bit to get back into it again have not been printing in several years (I have one of the original Ender 3 printers) after i got the slicer figured out it started to get easier

Fantástica impresora. Encantado con la impresora. Lo único a mejorar es la cámara (baja calidad y mala conexión) y el ruido por lo demás muy contento con las calidades y los resultados tras varios meses con ella y muchas impresiones sin ningún problema. Servicio técnico ágil en consultas realizadas

Amazing multi head printer. Early adopter, besides some small software glitches in the slicer and some annoyances in firmware the printer has been working flawless, tool-head swapping is fast, I love that everything is on the right side of the printer. Printing multi-color TPU easily without having to manually swap filament is a dream come true

Great printer with great capabilities!. I've had this print for almost 6 weeks now and only had one issue and after reaching out to Flashforge they sent me a replacement nozzle. I have printed PLA, PETG, ABS and ASA so far with great results. So far it has 407 print hours (my older 5M has about 2,700)

Great printer with great capabilities! I've had this print for almost 6 weeks now and only had one issue and after reaching out to Flashforge they sent me a replacement nozzle. I have printed PLA, PETG, ABS and ASA so far with great results. So far it has 407 print hours (my older 5M has about 2,700).

Love this machine!. Having been printing on several printers Creality, Elegoo, Bambu. I find this machine extremely easy to use and love no ****! Also, the customer service is great and quick to answer and fix issues. If your thinking about purchasing one DO IT! You won't regret it

Fast without no waste. It was a learning curve on how to remove filament and how to load filament, but now that I have it down that it’s relatively easy. Absolutely happy with reducing the amount of waste of filament. The printer is very fast overall I think this was the best purchase I’ve made in 3-D printers

Flashforge Creator 5 Pro 4-Toolheads. This machine makes it easy to print in color. Being new to 3D printing my wife could believe the color prints. Very little waste as for the print quality I couldn't be happier. Very glad that I purchased this machine. I did highly recommend it. The printer not near the computer took a bit of time to hear the printhead scraping on the make board. It was at the beginning of the print. By the time I reached the printer the damage was done. Print board scraped hard! #4 printhead broken. Getting a replacement print head not available. found one wont be in until the end of Aug. broke 7-31

Creator5Pro for show. Love this machine. Mandark my 5 pro is fantastic. The multi head may have more issues down the line, but Mandark is super fast. My prints that come out have look really good with little blemishes. I might have to get a second one. The feet are kind of squishy and the machine moves more than his older brothers. We need a automatic filament feeding, and dehydration

The machine is great!!! even with the small problems with updates and stuff! id like to see flashforge produce a list of the winners of the free units. I also need them to fix some of the programming issues like removing print tower and everything not working.

Favorite Printer and Affordable. The Creator 5 Pro has been printing flawlessly since I received it, and I’m thinking of getting another one. Easy to use and even better support from Flashforge if I ever had any questions

Best printer ever invented. I have mostly Flashforge printers and I must say the Creator 5 Pro is the best in the market. I love it so much I’m fixing to buy another to add to my business

AWESOME PRINTER. From unboxing, to assembly, to multiple prints I have had nothing but a great experience! Definitely an upgrade from my AD5X!

She's a beast; no regerts!. This printer is a workhorse. Having 4 toolheads is an absolute game changer when it comes to multi color prints. I'm closing in on 300 hours, and the only fails I've had have been due to filament issues. Even single color prints come out crisper and cleaner on this machine vs my daughter's other brand, single nozzle printer

Huge step up for a relatively modest price. The Creator 5 Pro has to date, worked flawlessly. I've put in roughly 400 hours of print time and have yet to experience a failure not as a result of user error. Very quick tool swaps, none of which in the 400 hours of print time has failed, including multi day CYMK mixing prints where for every .08mm layer, it would swap 4 times. High temp materials have been a breeze as well. PA12, ABS, and ASA, all printed with no real problem. Same with flexibles like TPU 90-95A, and PEBA 95A. At the time of review, it is the only multi toolhead, enclosed with a chamber heater printer there is, and for the price I paid at pre launch, provided a MUCH greater value when compared to setting up comparable printers with the equipment necessary to arrive at a similar feature set. All this however is not without some cons. The lack of a purge bucket to catch the strands from filament swaps, and the start of prints was a hassle. The very first thing I printed after the built in benchy gcode, was a magnetic purge bucket out of PA12-CF. Not an ideal solution since it had to be small, barely large enough for all the purge from the 4 toolheads as to not interfere with the heating vent. (This has since changed, now purging away from the vent, allowing for a larger bucket, as long as it was not deep enough to cause a crash in the event the bed was lowered all the way. still a hassle). The printer also likes to wobble ALOT. The high print speeds and high acceleration in the default printer settings on Orcaslicer, coupled with the large cooling and tool changing assembly on the motion carriage makes even my VERY sturdy desk shake quite a bit. Enough so that I can not print on my Resin printer at the same time for fear of shaking the resin out of the vat. Even when pinning the desk down and against the wall with weights to reduce shaking too almost zero, the printer still wobbles quite a bit on it's soft feet. This also results in some noticable VFAs along flat walls which can be managed with profile tuning. Finally, the camera. It is nice that it has one, but the timelapses it records are horrible. Low framerates, and very low resolution exports. The live monitoring isn't much better either with similar issues. Overall however, for the price point, I would still gladly recommend this printer as a solid contender to anyone not only looking for a multi toolhead printer, but anyone looking for ANY printer in this price range

Love this machine! Having been printing on several printers Creality, Elegoo, Bambu. I find this machine extremely easy to use and love no ****! Also, the customer service is great and quick to answer and fix issues. If your thinking about purchasing one DO IT! You won't regret it.

Machine is great!! The machine is great!!! even with the small problems with updates and stuff! id like to see flashforge produce a list of the winners of the free units. I also need them to fix some of the programming issues like removing print tower and everything not working.

She's a beast; no regerts! This printer is a workhorse. Having 4 toolheads is an absolute game changer when it comes to multi color prints. I'm closing in on 300 hours, and the only fails I've had have been due to filament issues. Even single color prints come out crisper and cleaner on this machine vs my daughter's other brand, single nozzle printer.

Second machine. Got my second creator 5 pro because this machine is worth every penny and i have a 3d business and these business is only buying creator 5 pros two new machines and no problems from day one right out of box. Creator saves so much filament waste the only waste is the prime tower and its not much. Thanks flashforge for an awesome machine

Creator 5 Pro is Great. I am very impressed with this printer. We have had several flashforge printers 4 dreamers 3, Adventurer 5m, and 2 guider 2s. The guiders weren't my best experience, but I will say that the New software and this printer are definitely the best among them. I also have a had some Creality and Anycubic printers.. This one is my favorite, my first print was 4 colors on almost every layer and a 9 hour print, it exceeded my expectations by printing that model. I definitely recommend this printer if youre in the market. I purchased early and the facebook comments were making me worried, follow the instructions take your time especially if its your first printer, but again its agreat machine!

Amazing. So fast, prints like a dream. Almost no waste. Incredible machine

Printer works as advertised. I waited on getting another printer until this multi head unit came out, due to hearing the amount of waste that traditional AMS printing had. This unit lives up to the hype for how little is wasted on the print. I have put 220+ hours on it in the last month and I am loving it. Are there little issues, sure, but every new product launch will have them. Support has been amazing and the printer has performed excellent. I can only attribute one print failure to an issue with the printer itself. The other failures have all been self inflicted. I am honestly contemplating getting another one because of how solid this one is

Excellent Printer. I’ve had the Flashforge Creator 5 Pro for about six weeks now, and overall I’m really happy with it. It’s been easy to use, and I haven’t run into any significant issues so far. I’ve printed both single-colour and multi-colour projects, and everything has worked well with no major problems. What’s really stood out to me is how good the print quality has been. The prints have come out especially clean and consistent, which has been a big plus. For a printer like this, that’s exactly what I was hoping for. The multi-colour printing has also been very solid, which is one of the main reasons I bought it. It does what it’s supposed to do, it’s been reliable, and it hasn’t needed constant fussing or troubleshooting. If you’re after a printer that can handle a variety of prints without giving you too much drama, I’d say the Creator 5 Pro is a solid choice. Based on my experience so far, I’m happy to recommend it

Satisfied customer :-). Very Good and User-Friendly 3D Printer I have been very happy with the Flashforge 5 Pro so far. The print quality is excellent, and I have not experienced any problems with the printer up to this point. I especially like the touchscreen, as the controls are clear, intuitive, and easy to use. The build plate also feels high quality, and the printing speed is perfectly suitable for my needs. Delivery was fast, and overall the printer appears to be well made. One minor criticism is the top cover included with the Pro model. It does its job, but it feels slightly unstable and could be made a little sturdier. I also find the side-mounted filament inlet less than ideal, as it makes an additional filament dryer box almost necessary for proper filament storage. The software and the platforms for finding print files still feel like they are under development in some areas. There are a few minor software issues, but I would not consider this a major negative, as these things will likely improve over time. Overall, the Flashforge 5 Pro is a very good, reliable, and user-friendly 3D printer with excellent print quality. I am very satisfied with it

Good printer, lacking parts availability. The printer is very good. Parts availability is lacking

The hardware is super Exceeded every expectation and produced unparalleled quality even with generic filament

Exceeded every expectation. The hardware is super Exceeded every expectation and produced unparalleled quality even with generic filament

AH-MAZING. Love this printer

Best tool changer!. This has been an incredible printer! works flawlessly, going to buy more

Amazing printer. I've got my new printer and amazed by its quality as well as its performance. I alsp have the Adventurer 5M Pro and the Creator 5 Pro is just a successor of the previous one with amazing new features that can be performed with the multiple nozzles. The best feature for me is the fact that I can combine different materials especially for support and it make my prints absolutely perfect!

I love it!. This Printer became my 7th printer. I absolutely love it. It makes multicolor Actually fun to do now

Awesome machine. Two weeks and this machine has really impressed me it's saving me money, time,material. I've been doing four color prints right out of the box from day one and i didn't bother building the benchy for test. Why bother when this machine builds my moth dragon in 10hr instead of 18hrs on the ad5x and save so much filament hands down flashforge has made a great machine for a great price and i own four models of flashforge...ps I'll be purchasing ten more for my business. Thanks again Badger Hyde 3d Printing

An Outstanding Printer That Exceeded My Expectations. I've been a FlashForge customer for a while now, and I currently own both the Adventurer 5M Pro and the new Creator 5 Pro. I can honestly say I love both printers, but if the Creator 5 Pro had been available a year ago, I would have bought two of them instead of one of each. The Creator 5 Pro has exceeded my expectations. The print quality is excellent, producing clean, consistent prints, and it's noticeably quieter than my Adventurer 5M Pro. The dual-extruder system opens up so many creative possibilities, making multi-color and multi-material printing much easier than I expected. It has quickly become my favorite printer. If I could suggest a couple of improvements, the first would be adding a PTFE tube connection so users can run filament directly from a dryer to the printer in a closed path. It would be a small addition but a nice quality-of-life improvement for anyone who dries their filament before printing. The other thing I noticed is that the printer purges a fair amount of filament before each print. The amount really isn't significant in the grand scheme of things, but the first time you watch it, it almost feels like you're loading fresh filament before every print. I understand that it's doing this to ensure reliable extrusion and clean color changes, so it's not a deal breaker—just something new owners should expect. Overall, I couldn't be happier with this printer. The quality, reliability, and ease of use have been outstanding, and I'm already planning to add another Creator 5 Pro to my workshop soon. Great job, FlashForge! I highly recommend the Creator 5 Pro

its works great. works great setup was easy not to loud

from an H2D user. I personally gave up on Creality a few years ago once I came across Bambu Labs. I was a day-1 backer of the Snapmaker U1, but pulled out before KS. I saw the Creator 5 Pro and wanting to get into multi-head, I decided to go for it. I am glad I did. Sure, the bed is a bit smaller than others, but the price-point is nice. This says it can do ABS/ASA, but I'm not sure the 'plastic' door and side covers would hold up to the high printer temps. (My H2Ds have glass). PLA is awesome, waiting to try PETG. Does not autofeed the filament, but does have runout sensors, camera (which you can view within any browser or Alexa device via ITTT). There is also a 4-pin micro connector on the spool side - as if for future dryer or multi-feeder devices?

Doing what is expected. I had high hopes when I first saw this printer. It has so far delivered what was expected. After printing several things, it appears to be saving me alot in filament as well as time. What was taking me several hours is now taking me half the time. So it was worth the wait to get it