Good home gym wall storage does two jobs: it gets plates, bars and bells off the floor so you stop tripping over them, and it frees the floor space you actually train on. This guide covers the storage options we sell from Tru Grit Fitness, the specs each listing gives, and the layout math that decides what fits on your garage wall. If you are still choosing the big pieces, start with our home gym buying guide and come back once the rack and plates are settled.
A quick honest note: our dedicated storage range is small. It is one modular wall system plus a handful of freestanding racks. That covers most garage gyms, but where a listing does not publish a number (a load rating, for example), we say so instead of guessing.
Wall storage vs floor storage: which to use where
Wall storage wins when floor space is the limit. Freestanding storage wins when you rent, cannot drill, or your wall is not solid enough to carry the load.
- Wall-mounted: zero footprint on the floor, but it needs solid framing or masonry and permanent holes.
- Freestanding: moves with you and needs no drilling, but each piece takes a few square feet of floor.
- On the rack: plate horns on a power rack are handy, but check the listing first. Our Wall Mount Foldable Power Rack (RIGG1000) lists its in-box parts, and plate storage pegs are not among them, so plan separate plate storage if you go with a folding rack.
Home gym wall storage: the Tru Grit modular system
The Tru Grit Modular Wall Storage line is a set of steel beams that bolt to the wall, plus attachments that pin into them. Per the listings, the beams are 11 gauge, 2 x 3 inch steel tubing, powder-coated black, with 3/4 inch interlocking plunger pins. Prices below are at the time of writing.
- 96 inch Vertical Beam (MWSS1000), $200.06. Needs 96 inches (8 feet) of clear wall height.
- 48 inch Vertical Beam (MWSS1001), $110.06. A better fit under a garage door track or a low header.
- 48 inch Horizontal Beam (MWSS1002), $120.05, and the 32 inch Horizontal Beam (MWSS1003), $100.07.
- Weight Plate Holder Attachment (MWSS1006), $65.06, with a 12 inch storage post and mounting hardware included.
- Kettlebell Storage Hook (MWSS1007), $55.08, listed for 150 lb of storage.
The vertical beam listings recommend 5/16 x 3-1/8 inch lag screws, which are not included. The listings do not publish a total load rating for a loaded wall, so if you plan to hang a full set of bumper plates, call us and we will check with the manufacturer before you order.
Plate storage ideas that actually fit
Plates are the heaviest thing you store, so they decide the layout. Three options from our range:
Plate horns on the wall
Pinning plate holders into the modular beams keeps plates fully off the floor. The geometry is simple: our Phantom Elite bumper plates list a 450 mm diameter, which is about 17.7 inches. That means:
- The center of the lowest horn must sit at least about 8.9 inches (half a plate) above the floor, plus some clearance so plates do not drag.
- Two horns holding full-size bumpers need their centers at least about 17.7 inches apart, vertically or side by side, plus finger room to grab a plate.
- Plates stick out from the wall by up to the 12 inch post length plus the beam itself, so keep that strip clear of your bar path and car door.
Horizontal rolling plate rack
The Horizontal Weight Plate Storage Rack (ACCS1000), $160, has six dividers for plate pairs from 10 lb up to 55 lb, a listed 340 lb capacity, casters with a handle, and rubber foot pads. It is the no-drill choice.
Plate tree with bar holders
The Vertical Plate and Bar Combo (ACCS1001), $200.99, has six 12 inch plate posts and six barbell holders in a listed 21.65 x 24.40 x 45.27 inch size, which works out to under 4 square feet of floor. Choosing plates? See bumper plates vs iron plates.
Barbell storage wall: vertical or horizontal?
Bars are long, and that is the whole decision.
- Vertical storage (bars standing upright, like in the ACCS1001) uses the least wall width. It needs ceiling height for lifting the bar in and out, so measure before you commit in a low garage.
- Horizontal storage (bars lying across the wall) needs a clear wall run at least as long as your longest bar. Our 15 kg Shorty Bar alone lists a 74.01 inch length, and full-size Olympic bars are longer. Our guide to how much an Olympic barbell weighs covers bar types.
Dumbbells and kettlebells
Our dumbbell storage is freestanding. Two listed options:
- A-Frame Dumbbell Rack (RACK1001), $124.99: holds 10 rubber or neoprene hex dumbbells (five pairs), rated for 200 lb, listed at 14.25 x 13 x 26 inches.
- Dumbbell Weight Storage Rack (RACK1000), $275.99: a 3-tier rack with angled shelves, listed at 60 x 48 x 23.7 inches. The listing does not publish a weight capacity.
Kettlebells can go on the wall with the MWSS1007 hook.
Storage footprint at a glance
| Item | Type | Listed size | Listed capacity | Price at time of writing |
|---|---|---|---|---|
| Modular beams (MWSS1000 to 1003) | Wall | 2 x 3 inch tube, 32, 48 or 96 inch lengths | Not listed | $100.07 to $200.06 |
| Plate Holder (MWSS1006) | Wall attachment | 12 inch post | Not listed | $65.06 |
| Kettlebell Hook (MWSS1007) | Wall attachment | Not listed | 150 lb | $55.08 |
| Horizontal Plate Rack (ACCS1000) | Floor, rolling | Not listed | 340 lb | $160.00 |
| Plate and Bar Combo (ACCS1001) | Floor | 21.65 x 24.40 x 45.27 in | 6 bars, 6 plate posts | $200.99 |
| A-Frame Dumbbell Rack (RACK1001) | Floor | 14.25 x 13 x 26 in | 10 dumbbells, 200 lb | $124.99 |
| 3-Tier Dumbbell Rack (RACK1000) | Floor | 60 x 48 x 23.7 in | Not listed | $275.99 |
Mounting safely: studs, concrete and floor load
- Find the studs. Lag screws must go into solid wood studs, not drywall alone. The RIGG1000 listing states its stringer plates must be fastened into solid wood studs, and the same logic applies to any loaded storage beam.
- Concrete or block walls need masonry anchors, not wood lag screws. Use anchors rated for the load and follow the manufacturer’s instructions; if they are unclear, call us before drilling.
- Load low, heavy first. Put the heaviest plates on the lowest horns. Lifting a heavy plate off a low horn is easier than pulling it down from overhead.
- Floor racks need a level floor. The ACCS1000 and RACK1000 have rubber foot pads; a mat under freestanding storage helps protect a sealed garage slab.
For overall room planning, see how much space you need for a garage gym, and for a folding rack that tucks into the wall next to your storage, read our folding wall mount squat rack guide.
Frequently asked questions
What is the cheapest home gym wall storage setup?
From our range, one 48 inch vertical beam ($110.06) with a plate holder ($65.06) and a kettlebell hook ($55.08) comes to $230.20 at the time of writing, before lag screws. Our garage gym on a budget guide shows where else to save.
How far apart should plate storage horns be?
For 450 mm bumper plates, keep horn centers at least about 17.7 inches apart, plus a few inches of grip room, and the lowest center at least about 9 inches off the floor.
Can I mount barbell storage on drywall?
Not on drywall alone. Fasten into solid wood studs or use proper masonry anchors in concrete, following the manufacturer’s instructions.
Is a plate tree or wall storage better?
Wall storage saves floor space; a plate tree such as the ACCS1001 needs no drilling and also holds six bars.
Orders of $999 or more ship free by freight; below that, shipping is a flat $200, so storage often makes sense bundled with a rack or plates. Questions about fit, mounting or load? Call us at 866-777-2590, Monday to Friday, 9AM to 6PM PST. Returns follow our return and refund policy.
