(866) 777-2590Mon–Fri 9AM–6PM PST
FAST + FREE Shipping on orders above $999 · Lifetime Returns

FAST + FREE Shipping on orders above $999 · Lifetime Returns

VintageView Vino Rails Review: Sizes, Price, Install

This VintageView Vino Rails review covers what you actually get when you buy Vino Rails: how many bottles each piece holds, how much wall space and depth they need, what mounting hardware is involved and what they cost per bottle at our listed prices. Vino Rails are VintageView’s cork-forward wine pegs. Two slim aluminum rods project straight out from the wall and the bottle rests on them with the cork facing the room, so from the side the bottle appears to float. We have not installed them ourselves; everything below comes from our product listings and from VintageView’s own product page and installation instructions.

VintageView Vino Rails review: what they are (and are not)

Every Vino Rails product is built from the same unit: a pair of rails that holds one bottle. VintageView confirms on its Vino Rails 1 product page that one order is one set, for one bottle. There is no longer “rail” that holds a row of bottles; you build capacity one bottle at a time, or buy a kit that bundles several sets.

Vino Rails store bottles cork-forward only. If you want labels facing out, you are looking at Vino Pins, W Series or Evolution instead (more on that below). VintageView’s product page also notes that bottles on Rails do not rest at a downward neck angle the way they do on Vino Pins, and that Riesling-style sloping-shoulder bottles still fit.

Vino Rails sizes and bottle capacity

From VintageView’s dimension table for the single set:

  • Drywall version (with collars): 3-3/4 in wide, 5 in high, 13-1/2 in deep, 1 bottle
  • Wood version: 3 in wide, 5 in high, about 13 in (33 cm) deep, 1 bottle

VintageView’s spec sheets say to allow a total depth of 13 in from the wall with bottles stored. That depth is the main trade-off of cork-forward display: Rails take very little wall width but stick out farther than label-forward pegs, so think about walkways and door swings before you commit a hallway to them.

For magnums, the Vino Rails 1 Magnum holds one 1.5 L bottle and adds a curved connecting piece at the end to keep the rods aligned under the extra weight.

Vino Rails price per bottle

Here is how the Vino Rails range works out per bottle at the prices currently listed on our product pages. Post kit prices change with width and finish, so the figures shown are the lowest listed option.

Product Bottles Listed price Per bottle
Vino Rails 1 1 (750 ml) $16 $16.00
Designer Grid 3×1 3 $54 $18.00
Designer Grid 3×2 6 $108 $18.00
Designer Grid 3×3 9 $162 $18.00
Vino Rails Flex 45 9 $194 $21.56
Vino Rails 1 Magnum 1 (1.5 L) $43 $43.00
Vino Rails Flex Mag 45 9 (1.5 L) $431 $47.89
Double Sided Post Kit 10 40 / 120 from $1,201 / from $2,681 $30.03 / $22.34

The single set is the cheapest way to buy per bottle. The Designer Grids cost a little more per bottle, but they include drywall collars, all the hardware and a 36 in printed plotting guide, which takes the guesswork out of hole placement. Flex columns cost more again because you are paying for the vertical mounting strips that carry the rails.

Cork-forward vs label-forward

The orientation question decides most purchases. Cork-forward Rails show the capsule and cork, pack bottles tightly side by side and need very little wall width. Label-forward pegs and racks show the whole label and sit closer to the wall, but each bottle takes up more horizontal space. Our label-forward wine rack guide covers that side of the choice in detail.

For a direct comparison inside the VintageView range:

  • Vino Pins are the label-forward version of the same peg idea. The Vino Pins 1 is listed at $21 per bottle and needs a footprint about 13 in wide. Our Vino Pins installation guide covers spacing and studs.
  • W Series and Evolution are label-forward wall racks rather than individual pegs, with single, double or triple deep options. See W Series vs Evolution for that comparison.

VintageView designs Rails to mix with its label-forward lines, and its product copy suggests pairing Rails with Vino Pins or Wall Series displays. Our wine display wall ideas post has more layouts.

Wall mounted wine rail installation: studs, spacing and hardware

These points come from VintageView’s “Vino Rails for Drywall Surfaces” and “Vino Rails for Wood Surfaces” installation instructions (PDFs linked from the Vino Rails 1 product page on vintageview.com):

  • Two holes per bottle, 2-1/2 in apart for 750 ml bottles. VintageView says to adjust to 3 in for magnum racking and check the product-specific instructions.
  • Vertical spacing: mark at least 5 in above or below each mounting hole for the next set in the same column.
  • Wall thickness: the mounting surface must be at least 1/2 in thick.
  • Find out what is behind the wall first: drill 5/32 in pilot holes to see whether you hit solid wood or drywall.
  • Drywall: collars are required. The drywall kit uses toggle bolts through 5/8 in holes, with the collar threaded on before the rail.
  • Wood or studs: collars are optional. Wood lags go into the pilot holes and the rails thread onto them by hand.
  • Maintenance: VintageView says to check Rails regularly for tightness and hand-tighten any that loosen.

When ordering a single set, pick the mounting surface that matches your wall: VintageView sells Vino Rails 1 as a drywall version that includes collars, or a wood/stud version. For side-to-side spacing, a VintageView reply on the product page recommends at least 2 in between Rails. Our guide to wine rack installation into studs vs drywall anchors explains the trade-offs.

Flex columns and floor-to-ceiling posts

If you would rather drill fewer holes, the Vino Rails Flex 45 mounts nine rails to a pair of vertical strips. Our listing gives it as 45 in tall, 3.5 in wide and 13 in deep with bottles, and the listing says the column can run straight up or tilt up to 45 degrees. For glass walls, stone or room dividers, the post kits attach the rails to a 10 ft steel post that is cut to fit between floor and ceiling. The Single Sided Post Kit 10 starts at $747 and holds 20, 40 or 60 bottles depending on width.

Vino Rails finishes

VintageView lists the single Rails in matte black, gloss black, milled aluminum, golden bronze and gunmetal. Our Flex system listings add a two-tone option (milled aluminum and matte black). Finish choice can change the price on some products, especially the post kits, so confirm the finish on the product page before you order. Our VintageView listings state a lifetime warranty; check the product page for the item you choose.

Frequently asked questions

How many bottles does one Vino Rail hold?

One. A Vino Rails set is a pair of rods for one bottle, either 750 ml or, with the Magnum version, 1.5 L. Kits such as the Designer Grids and Flex 45 bundle several sets.

Can vino rails go straight into drywall?

Yes, with collars and toggle bolts. VintageView’s instructions say collars are required for all drywall installations and the wall must be at least 1/2 in thick.

How far does a wall mounted wine rail stick out?

VintageView’s spec sheets say to allow 13 in of depth from the wall with a bottle stored.

Can I show labels with Vino Rails?

No. Rails are cork-forward only. For labels facing out, use Vino Pins or a label-forward rack. Our wine pegs vs wine racks guide compares the options.

Planning your wall

For capacity math across a full wall, read how many bottles fit on a wine wall, or start with our wine rack and cellar storage guide. You can browse every VintageView product we carry. Orders of $999 or more ship free, with a $200 flat rate below that. Questions about layout or hardware? Call 866-777-2590, Monday to Friday, 9AM to 6PM PST.

Leave a Comment

Your email address will not be published. Required fields are marked *

✓ Authorized dealer for 200+ brands✓ Free shipping over $999✓ Lifetime return window✓ US-based support, Mon-Fri 9-6 PST✓ Secure checkout
Secure Site256-bit SSL encrypted
Safe CheckoutYour details stay private
Authorized Dealer200+ brands, factory-direct
Scroll to Top